Click on the image to check the artwork
| Model | HF400i | |
| voltage | 3 X 380V 50 Hz | |
| capacitance | 136 KVA | |
| Safety current | 200 | |
| Protection class | IP 22 | |
| Maximum load voltage | 400 V | |
| diameter of plasma torch | ??58 mm | |
| Plasma gas | atmosphere , O2, N2, Ar/H2 |
|
| Compressed gas rotation | O2/N2, N2, F5 | |
| cutting electric current plasma cutting |
10 - 440 A | |
| 200V, 440 A / 100% | ||
| Plasma carving | 5 - 50A | |
| Stainless Steel | Maximum cutting range | 0.5 - 100 mm |
| cutting length | Recommended cutting range | 1 - 80 mm |
| Carbon Steel | Maximum cutting range | 0.5 - 80 mm |
| cutting length | Recommended cutting range | 0.5 - 60 mm |
| Perforation thickness | ?? | Perforated stainless steel and carbon steel the same thickness, are 40 mm. Equipped with a dynamic function of the arc voltage to increase the perforation is recommended to increase the arc voltage KHC9100 Kilby. |
| Cooling methord | water cooling | |
| Arc methord | High voitage,low rate ??10KV, 100Hz?? | |
| Net weight | 589 Kg | |
| Size( L x W x H) | 1030 X 680 X 1450 mm | |
Gernany cutfire